A car should accelerate smoothly when you
press the gas pedal. In case if there is any jerking. You should exercise
caution because there is something troubling. The jerks during the acceleration
not only distract a driver, but they hint at some serious mechanical issues
with a vehicle.

The sooner you can identify the source of
the problem, the less likely there will be damage and, of course, unnecessary
costs for expensive repairs. However, you should also understand the causes of
concern behind such a problem.

Your catalytic converter is not working
properly

The catalytic converter is a useful device
to get rid of harmful emissions. It is an integral part of the tailpipe, where
it always performs its duty properly. A catalytic converter relies on a
chemical reaction for the conversion of harmful gases. However, there are enough
chances of damaging the catalytic converter and, of course, its capacity to
convert harmful gases.

In such a situation, the exhaust would not
work properly, and there would be a problem at the tailpipe. However, because
it emits less pollution, this is not noticeable during normal driving. But
acceleration puts a lot of pressure on the exhaust, and a problematic catalytic
converter does not allow enough emission to emit through the tailpipe. If there
is insufficient passage for emission, gases may cause problems with the engine
and jerks. For more clarification, just access the expert service at Service My
Car.

An electronic defect may hamper an
essential sensor process

Have you ever experienced running against
the breeze? If yes! You cannot deny the fact. What amount of effort does a car
need to put together? A car’s engine provides enough force to move in a
direction. However, the faster your car runs, the more it needs acceleration.

During higher acceleration, an engine
requires all its tools to work at their peak. Whether it is fuel injector
system or spark plugs, everything should be at the highest level of efficiency.
If these components are not working together seamlessly, it can cause your car
to shake while accelerating.

Inefficient spark plugs would emerge as a
common reason behind the constant jerking of a car. However, for optimum
performance, a spark plug must produce a proper spark. To get confirmation
about a spark plug issue, opt for an expert inspection from Service My Car.
However, you should avail yourself of a major service at an interval of two
years for preventive maintenance. It includes expert spark plug replacement as
well as other major part replacement and tune-ups.

Besides, a faulty fuel injector system
might put you in trouble. It could be due to a clogged fuel injector or fuel
filter that cannot provide proper fuel for combustion. However, while fuel
filter replacement is common in major services, you can avoid problems by
having an expert inspection during routine car maintenance.

Moreover, a mass airflow sensor might cause
a car to shake during acceleration when there is a need for more air inside the
combustion chamber.

For a proper diagnosis, just visit Service
My Car for car engine repair by an expert. In case you own a nissan car, and
you are looking for an engine repair then we would like to recommend Service My
Car, the best and trusted nissan service center dubai for your nissan car
engine repair.

Your car's transmission is not up to
mark or has a faulty throttle pedal, cable, or position sensor

Because the transmission transfers power
from the engine to the wheels, a problem in motion would result. However, it is
less common because a faulty transmission may begin to make unusual noises,
providing you with an unpleasant driving experience.

Besides, an incorrectly positioned throttle
pedal might cause a lot of problems during acceleration. Another reason for a
jerk is a problematic throttle cable or malfunctioning throttle position
sensor.

However, you should not take it for granted
when there is expert service available for car transmission repair at Service
My Car.

Worn timing belts might be a cause for
concern

The timing belt would not be loose or worn
for optimum performance. If you drive with a worn timing chain that is going to
miss one or more links, the problem will occur sooner or later. A broken link
might cause problems during an engine operation. It might hamper
synchronisation of various internal tools and result in jerks during
acceleration.

Therefore, arrange a trip to Service My Car
for an inspection under the hood and possible timing belt replacement.

An electronic defect may hamper an
essential sensor process

Modern cars rely heavily on sensor input,
but these sensors need electricity to work. As a result, any problem with the
power supply would cause a sensor to fail to send data. If it is a mass airflow
sensor, there would be a problem in the combustion process. You would definitely
experience jerks during acceleration if combustion does not occur properly.

If it is a speed sensor, it disturbs the
functioning of the transmission system. The transmission would not be
stationary and would start to roam in search of a proper gear. This could force
your vehicle to jerk unnecessarily.